Model: 45/90 AUDIO LOCATOR PROBE
45/90 Audio Locator Handheld Probe
Works With Both Mark IV & Mark V Kits!
Features
-
Easy to operate
-
Unaffected by surface cover
-
Light weight and strong
-
Water resistant, build for rugged field use
-
Telescoping handle
-
Depth locator "bubble"
Instrument Includes:
-
45/90 Handheld Probe
-
Connection Cable
-
Instructions Manual
Easy to operate, unaffected by surface cover, light weight, telescoping handle, water resistant!
Model: 45/90 AUDIO LOCATOR PROBE
Recommendations
-
Use to relieve frequent bending or kneeling during locates and depth determination
Dimensions
-
Length 34" (863.5mm)
-
Operating weight 1.5 lbs. (0.68 kg)
-
Shipping weight 3 lbs (1.36 kg)
-
Shipping dimensions 4" x 4" x 32" (101.6mm x 101.6mm x 812.8mm)
Model: 45/90 AUDIO LOCATOR PROBE
Handheld probe for use with Model PD Mark IV receiver. The addition of the 45/90 Probe to the Model PD Pipe/Cable/Short Locator kit gives the operator a search coil much closer to the ground, saving the back strain of bending over on difficult locates. The 45/90 also makes depth determination much easier.
Easy to operate and unaffected by surface cover. It's light weight telescoping handle is ruggedly constructed and water resistant.
Model: 45/90 AUDIO LOCATOR PROBE
The Model 45/90 Probe was introduced for use with the Model PD Detector to provide ease of operating in pipe and cable locating, short location in corrosion control systems, and greater tracing distances.
To operate, connect the 45/90 Probe by inserting the plug into the receptacle labeled “Cleats” on the Receiver of the Model PD Detector. This operation automatically disconnects the search coil in the Receiver and the search coil of the probe is placed into the circuit. Signals received by the search coil in the probe is amplified through the Receiver.
Operating of the 45/90 Probe is the same as with the Model PD Receiver. (Refer to Operating Information for the Model PD Pearson Detector). When the search coil head is in a vertical position, a sharp “null” will mark the center of the pipe, and when the probe head is in a horizontal position, the pipe location is marked by a “peak” signal.
For determining depth, turn the probe using the depth angle bubble into a 45 degree angle position and move away from the known pipe center-line with head 90 degrees to the pipe, and when a “null” is noted, mark the location. The distance from this location to the pipe center-line is the depth.
NOTICE: THIS UNIT IS WATER RESISTANT.
Model: 45/90 AUDIO LOCATOR PROBE
Parts List:
-
#005-143 Probe
-
#005-144 Handle
-
#026-046 Cable